A New Heavy-Duty Commercial Vinyl Floor Will Last Many Years

December 19, 2020 Updated: December 19, 2020

Dear James: We are setting up a playroom for our children. The room is carpeted now, but we want something more durable. Would commercial-grade flooring work well? —Barry H.

Dear Barry: Unless your children are really wild, almost any type of commercial-grade flooring should hold up well, definitely better than residential carpeting. It is typically thicker and manufactured from better base material, so expect it to cost more than flooring you may see at a home-center store. Check at a commercial flooring supplier.

Although there are several types of flooring materials that would work, vinyl flooring is probably your best choice. It is very durable, and you should be able to install it yourself without a lot of previous experience. It works particularly well in high-moisture areas like basements and laundry rooms, and it is not damaged by spills.

Epoch Times Photo

Years ago, you may have found it difficult to find a good selection of colors or patterns of commercial-grade vinyl flooring. Over the past decade or so, durable vinyl tiles have become more popular for residential use, and manufacturers are now providing many colors and patterns suitable for homes.

Most vinyl tiles are available as 12-by-12-inch squares. One of the most attractive patterns is simulated marble. It is available in vibrant colors such as green, rose, and almond. Simulated stone tiles, available in several colors and types of stone, create an attractive floor that does not show dirt.

The newest tile flooring is designed to simulate hardwood floor planks. These are usually about 3 inches wide, as are real hardwood planks. Natural grain patterns are used, so once it is installed, it has an authentic hardwood appearance.

True commercial-grade vinyl tiles are typically 1/8-inch thick. Thinner residential-grade tiles are available with an adhesive backing. If your primary concern is durability, select the thicker commercial-grade tiles.

It is only slightly more difficult to install the commercial-grade tiles than the adhesive-backer tiles. The tile manufacturers offer the adhesive for commercial-grade tiles. It is best to use the adhesive from the manufacturer of the tiles you are using to be sure it is compatible with the material.

If you cannot find commercial-grade vinyl flooring locally, contact the following suppliers: Amitco International, (800) 268-4260; Armstrong, (800) 233-3823; Congoleum, (800) 274-3266; Forbo Flooring, (800) 842-7839; and Tarkett, (800) 367-8275.

As with installing any flooring material, it is imperative the base under it is smooth and clean. Tiny high points on the base result in excessively worn spots on the flooring above them. Lay a flashlight on the floor, and shine the beam over the floor. Any high points will be apparent.

When vinyl tiles are produced, the edges are machined perfectly so the joints are nearly invisible after they are installed. You will have to cut some of the tiles yourself to make them fit the room. You can use a utility knife, but it is better to rent a tile cutter to make more accurate edge cuts.

Since most rooms are not square, align the tiles with the wall that is most viewed when you enter the room. This looks better. Once the adhesive is spread on the floor and the tiles are laid, most manufacturers recommend the tiles be seated down into the adhesive with a heavy roller. This is important for good adhesion to the floor and for flat, tight joints.

Send your questions to Here’s How, 6906 Royalgreen Dr., Cincinnati, OH 45244, or visit Dulley.com. To find out more about James Dulley and read features by other Creators Syndicate writers and cartoonists, visit the Creators Syndicate website at Creators.com. Copyright 2020 Creators.com.